Coatings & Sealers
Scroll Button

Coatings & Sealers

Coatings & Sealers

Masonry brick and concrete are among the most durable building components available. However, these materials will deteriorate over time if not maintained properly, especially in our northeast climate with our ever-changing weather conditions. From our experience, coatings and sealers can be among the most effective methods of protecting brick and concrete structures from the elements.

Advanced Coating Technology

New technology has created penetrating coating compounds to replace the old film forming products for brick and concrete structures. When properly applied, these advanced coatings demonstrate can be very effective in prolonging resistance to weather deterioration.

Clear Coatings
State-of-the-art clear coatings are based on silicone, silane, and siloxane compounds that penetrate brick and masonry surfaces. Available in gloss or matte finishes, these coatings are intended to provide long-term protection to brick and concrete surfaces.

Pigmented Coatings
Today’s pigmented coatings/sealers are based on advanced water-based acrylic or elastomeric materials. Available in a variety of colors, pigmented emulsions penetrate the masonry surface and change the surface to the desired color.

Coatings and Sealers Prevent Water Damage

Sealing brick and concrete walls can prevent water from penetrating junctures exposed to severe weather. Exterior masonry coatings and sealers are considered to be water repellant but not waterproof. Nevertheless, when properly applied, these compounds change the capillary angle of the pores in the face of the brick masonry wall from positive (suction) to negative (repellency). In certain situations, coatings and sealers can also bridge or fill hairline cracks or separations in the face of masonry walls and provide some protection from damaging freeze/thaw cycles.

Coating Application

COATINGS AND SEALERSThe amount of surface protection provided for newly placed brick and/or concrete can significantly influence its longevity. Unprotected patches may allow moisture to enter the structure at the patch edges or through shrinkage cracks.

Most coatings can be applied by brush, roller, or spray. Before applying the coating, make sure the wall is clean, as heavy accumulations of atmospheric dirt may interfere with proper penetration or adhesion of the coating and result in poor performance and shorter life. Test the selected coating/sealer on wall sections scheduled for treatment. The test areas should be at least 10 feet square.

Check the moisture content of the wall at several locations and observe climatic conditions to assure consistency with the manufacturer's recommendation.

Selecting a Coating or Sealer

Select a coating or sealer produced by a well-known manufacturer with strong track record. Request references of similar projects and require test reports for relevant performance criteria and a written warranty from the coating manufacturer.

Verify the qualifications of the application contractor, and make sure the contractor protects adjacent and surrounding surfaces from overspray as necessary.

Copyright © 2022 Abbot Building Restoration Company, Inc.
SearchPro Systems
  • This field is for validation purposes and should be left unchanged.